Assembly - attachment
43
Machine in the
transport position
Check the surrounding area before starting to use machine
Check the surrounding area before driving and using the machine.
This prevents persons and animals in the vicinity from being harmed.
If the surrounding area is not checked, it may result in serious injuries
to persons or animals.
The machine is placed in its transport position in the following way:
Check that the mechanical safety valve is open.
Activate the tractor hydraulics and raise the machine's cutting unit.
Activate the tractor's hydraulics and set the machine's drawbar as
shown.
Pull the elastic cord out over both ends of the guard as shown.
This prevents the tarpaulin from flapping during transportation.
To Next Page
Loading...
