Cleaning
54
Cleaning
Before cleaning
Higher risk when cleaning the equipment
When cleaning, there is an increased risk of injury.
Paying attention when carrying out cleaning work will ensure your
safety and that of others.
Failure to follow the safety instructions may result in serious injuries.
Therefore, do the following before cleaning:
• Check the area around the machine.
• Disconnect the tractor's PTO outlet.
• Depressurise the hydraulic system and disconnect it from the
tractor.
• Activate the hand brake and stop the tractor.
• Remove the ignition key from the tractor.
• Use the correct climbing units for the machine.
Disconnect the power when cleaning the machine
Always disconnect the power before you start cleaning the machine.
This will prevent short circuits and damage to the electric circuit.
There is a risk of burns and other serious injuries if the electrical
systems short circuit.
Protect your body and face when cleaning the machine
Wear the correct protective gear for body and face when cleaning the
machine.
This will protect your body and face from dirt and oil splashes.
Severe skin and eye injuries can be caused if body and face are
insufficiently protected.
Before starting to clean the machine do the following:
• Open all guards around the cutting unit.
• Remove all loose material from the machine.
To Next Page
Loading...
