Operation
52
Check that the hydraulic mechanical safety valve is open.
Connect the tractor's PTO outlet.
Carefully increase the speed on the PTO shaft to 540/1000 RPM.
→ »RPM on the PTO outlet« page 26
Activate the tractor hydraulics and turn the machine's drawbar to
the right side of the tractor.
Activate the tractor hydraulics and lower the cutting unit of the
machine to its working position.
Activate the tractor hydraulics until the hydraulic cylinders on the
cutting unit are fully extended to their maximum length.
Find a suitable driving speed for the tractor and cut the 1st swath.
To Next Page
Loading...
