Safety
7
The meaning of the
symbols
Stop the tractor before working on the machine
Be careful! The tractor engine must ALWAYS be stopped and the
ignition key removed before carrying out repairs or maintenance,
cleaning, or lubricating the machine.
Read and observe the instruction manual
Be careful! Read and ensure you understand the instruction manual
before the machine is used.
Ensure no clothing/body parts get caught in the PTO shaft
Guards may not be removed or opened until the machine has stopped
rotating. The tractor engine must be stopped, the ignition key removed
and the handbrake applied.
Danger of being crushed by the machine's cutting unit
The safety valve must always be closed during repair or maintenance
operations on the machine's cutting unit. The tractor must always be
stationary, with the ignition key removed before repair or maintenance
operations are undertaken on the machine.
Use the correct support for the machine
Your body could become caught!
Never work under the machine without using the correct support. The
tractor engine must be stopped, the ignition key removed and the
handbrake applied.
To Next Page
Loading...
