Maintenance
98
Wheel
After 10 working hours
Thereafter, every season
→ »Maintenance intervals« page 61
Use a suitable torque wrench adjusted to the torque shown in the
table below.
Place the wrench on the wheel bolts.
Check all the bolts on the wheels and tighten them to the torque
shown.
Check the tyre pressure and, if necessary, top up the tyre to the
pressure shown in the table below.
Model Tyre
Dimension
Tyre pressure
bar (psi)
Bolt torque
Nm (ft/lb)
532-540 10.0/75 -15.3 3.9 (57) 300 (220)
To Next Page
Loading...
