Maintenance
134
Type 2
»Maintenance intervals« page 79
Oil amount when changing oil:
The oil is changed as follows:
Use a suitable tool to remove the oilplug 3.
Let the oil flow into an appropriate container.
Allow the last of the oil to drip out of the transmission for approx.
10 - 15 minutes.
Fit oilplug 3 and tighten it.
Remove oilplug 1 and 2.
Fill the new oil through the hole for oilplug 1.
• The correct oil level is reached when the oil reaches the edge of
the hole for oilplug 2.
Fit oilplugs 1 and 2 and tighten them.
»Lubricants« page 170
Litre
(approx.)
Pints (US)
(approx.)
Pints (Imp.)
(Approx.)
24.23.5
To Next Page
Loading...
