Viessmann VITOGAS - Delivered Condition

Heat-up time
The heat-up times specified will be achieved subject to the maximum
continuous output of the DHW cylinder being made available at the
relevant flow temperature and when DHW is heated from 10 to
60 °C.
Cylinder capacity l 130 160 200
Heat-up time (min)
at heating water flow temperature
90 °C 20 19 18
80 °C 25 26 25
70 °C 34 34 32
Pressure drop (primary circuit)
3
4
5
6
8
10
20
30
40
50
60
80
100
200
300
400
500
600
800
1000
600 800
1000 2000 3000 4000 5000 6000 8000
10000
Heating water throughput in l/h
Pressure drop in mbar
AB
A
130 litre cylinder capacity
B
160 and 200 litre cylinder capacity
Pressure drop on the DHW side
3
4
5
6
8
10
20
30
40
50
60
80
100
500 600 800
1000 2000 3000 4000 5000 6000 8000
10000
DHW throughput in l/h
Pressure drop in mbar
Delivered condition
Vitocell 100-H, type CHA
130, 160 and 200 litre capacity
DHW cylinder made from steel with Ceraprotect enamel coating.
■ integral protective magnesium anode
■ fitted thermal insulation made from rigid polyurethane foam
■ integral welded sensor well for cylinder temperature sensor or control thermostat and
■ threaded adjustable feet
Colour of the epoxy-coated sheet steel casing: Vitosilver.
DHW cylinder
(cont.)
VITOGAS
VIESMANN
29
5822 428 GB
3