ViewSonic LDP135-151 - PIP;PBP Mode

124
PIP/PBP Mode
1. Press MENU on the remote control to display the OSD Menu.
2. Then press OK or use q/p/t/u on the remote control to select the PIP/PBP
Mode menu.
3. Press q/p to select the menu opon. Then press OK to display its sub-menu, or
press t/u to adjust/select the seng.
NOTE: Some sub-menu opons may have another sub-menu layer.
Menu Opon Descripon
PIP/PBP Setup
O
Disable the PIP/PBP feature.