ViewSonic LDP135-151 User Manual

47
Connecng the System Control Box (Hidden Installaon)
1. Carefully unfold the System Control Box panel. Ensure the main system control
board is on the right.
NOTE: Use cauon as the
System Control Box
panel is separated into two pieces
with wires aached.
2. Install the le part of System Control Box using the M6x16mm screws behind the
Cabinet.
3. Install the right part of the System Control Box using the M6x16mm screws
behind the Cabinet.

ViewSonic LDP135-151 Specifications

General

Brand	ViewSonic
Model	LDP135-151
Category	Monitor
Language	English