ViewSonic LDP135-151 - Detachable System Control Box; Wall Mounting

41
Detachable System Control Box
The System Control Box can be installed under the Cabinets (standard installaon)
for front access, or behind the Cabinets.
POWER
HDMI
OUT
AUDIO
OUT
AUDIO
IN
S/PDIF
OUT
IR IN
USB
5V/1.5A
USB
5V/1.5A
LAN
HDMI 1
(2.0)
HDMI 2
(2.0)
HDMI 3
(1.4)
HDMI 4
(1.4)
HDMI 5
(2.1)
RS232
USB C USB A
POWER
HDMI
OUT
AUDIO
OUT
AUDIO
IN
S/PDIF
OUT
IR IN
USB
5V/1.5A
USB
5V/1.5A
LAN
HDMI 1
(2.0)
HDMI 2
(2.0)
HDMI 3
(1.4)
HDMI 4
(1.4)
HDMI 5
(2.1)
RS232
USB C USB A
Standard Installaon Hidden System Control Box Installaon
NOTE:
• Standard Installaon video.
• Follow the below guide to install the display with the Hidden System
Control Box layout.
Wall Mounng
Installing the Upper and Lower Wall Mount Brackets
1422.4 mm
56 in
101.6 mm
4 in
304.8 mm
12 in
508 mm
20 in
711.2 mm
28 in
914.4 mm
36 mm
1117.6 mm
44 in
1320.8 mm
52 in
50.8 mm
2 in
7 mm
⁹/₃₂ in
25.4 mm
1 in
15 mm
¹⁹/₃ ₂ in
50.8 mm
2 in
1. Ensure the wall area and size is an appropriate installaon site.
NOTE: The height of the Upper
Wall Mount Brackets
must not be less than 90
³⁵/₆₄" (2300 mm) from the ground.
2. Using the Wall Mount Bracket (pictured above) as a guide, mark at least eight (8)
holes and pre-drill them.
3. Install the rst Upper Wall Mount Bracket with the provided screws (M6x50mm
Expansion for masonry; TA6x30mm for load bearing wood).