62
5. Connect the Network and Power cables of the Cabinets to the System Control
Box.
NOTE: There are ve (5) Network and ve (5) Power cables to connect.
• Route the Power cable through the opening provided in the Cabinet and connect
it to the power plug.
• Route the Network cable through the opening provided in the Cabinet into an
“S-shape" and connect it to the network port.
6. Repeat Steps 1~4 for the second display.
7. Install the bezels from the boom of the screen and use the M6x10mm screws to
secure it to the Cabinet.
To Next Page
Loading...
