ViewSonic PJD5112 - Powering On;Off the Projector; Powering On Procedure; Powering Off Procedure

12. On the warning dialog box message below, click [Yes] to continue.
13. The projector will restart to indicate the completion of the firmware update process.
14. Disconnect the USB cable and power cord from the projector. Reconnect the power cord and power
on the projector.
15. Press Menu on the projector keypad, scroll down and select Factory Default. Then, select Yes and
press Enter.
ViewSonicCorporation Confidential - Do Not Copy PJD5112
15