ViewSonic PJD5112 Service Manual

6 FRU (Field Replaceable Unit) List
Introduction
This section is a list of all the FRU removal . Following the FRU table of contents is an enlarged
view of the entire projector, which shows the primary FRUs in the projector.
When working on the projector, use appropriate anti -static precautions such as anti -static mats,
wrist straps and grounded work surfac es. Failure to do this can destroy static -sensitive
components and make the product inoperable.
ViewSonicCorporation Confidential - Do Not Copy PJD5112
43

ViewSonic PJD5112 Specifications

General

Projection distance	1.2 - 10 m
Projection technology	DLP
Contrast ratio (typical)	2000:1
Projector native resolution	SVGA (800x600)
Aspect ratio	4:3, 16:9
RS-232 ports	1
Dimensions (WxDxH)	280 x 218 x 114 mm
Power requirements	90~240VAC
Lamp power	180 W
Light source type	Lamp
Service life of light source	3000 h
Service life of light source (economic mode)	5000 h
Focus	Manual
RMS rated power	2 W
Headphone outputs	2
Serial interface type	RS-232
Noise level	30 dB
Power consumption (standby)	1 W
Power consumption (typical)	235 W
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Product type	Standard throw projector
Market positioning	Presentation

Weight and Dimensions

Weight	2600 g