ViewSonic PJD5112 Service Manual

Step Figure Description
18
1. Remove Speaker Module.
2. Loosen the screws and
remove front and back IR.
3.3 Assembly FAN Module
Step Figure Description
1
Assemble FAN2(J2394-0101-01):
1. Paste the FAN PAD
(P4E38-1070-00) on the middle of
it.
2. Paste the FAN Sponge*2
(P4R38-1530-00) on the top and
bottom of it as picture shown.
2
Assemble FAN1(J2394-0101-00):
Paste the FAN Sponge*2
(P4R38-1530-00) on the two edges
of it as picture shown.
Speaker Module
J1635-3720-00*1
FAN Sponge*2
FAN PAD
FAN Sponge*2
ViewSonicCorporation Confidential - Do Not Copy PJD5112
24

ViewSonic PJD5112 Specifications

General

Projection distance	1.2 - 10 m
Projection technology	DLP
Contrast ratio (typical)	2000:1
Projector native resolution	SVGA (800x600)
Aspect ratio	4:3, 16:9
RS-232 ports	1
Dimensions (WxDxH)	280 x 218 x 114 mm
Power requirements	90~240VAC
Lamp power	180 W
Light source type	Lamp
Service life of light source	3000 h
Service life of light source (economic mode)	5000 h
Focus	Manual
RMS rated power	2 W
Headphone outputs	2
Serial interface type	RS-232
Noise level	30 dB
Power consumption (standby)	1 W
Power consumption (typical)	235 W
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Product type	Standard throw projector
Market positioning	Presentation

Weight and Dimensions

Weight	2600 g