EasyManuals Logo

ViewSonic PJD5112 Service Manual

ViewSonic PJD5112
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #30 background imageLoading...
Page #30 background image
(2) Confirm LED indicator
LED Type Color Status Meaning
Power LED Blue Solid(LED× 1)
Lamp LED Off Off
Temp LED Off Off
The projector is in standby mode.
Power LED Blue Solid(LED× 2)
Lamp LED Off Off
Temp LED Off Off
Powering up
Power LED Blue Solid(LED× 2)
Lamp LED Off Off
Temp LED Off Off
Normal operation
Power LED Blue Flash(LED× 2)
Lamp LED Off Off
Temp LED Off Off
Power-down
Power LED Blue Solid(Full brightness)
Lamp LED Red Solid
Temp LED Red Flash
The projector system has some problems with its
fans, so the projector cannot start up.
Power LED Blue Solid(Full brightness)
Lamp LED Off Off
Temp LED Off Off
The lamp is in good condition and is projecting at
maximum brightness.
Power LED Blue Solid(Full brightness)
Lamp LED Off Solid
Temp LED Off Solid
The lamp has reached its end of life and must be
changed soon. The lamp wil l continue to operate
until it fails. Change the lamp. If the lamp is off,
then the ballast will become malfunction.
Power LED Blue
Flash(Full
brightness)
Lamp LED Red Solid
Temp LED Red Solid
The projector is shutting and the fan motor is
cooling the lamp for shutdown. Do not unplug the
power cord or turn the power off before the Lamp
LED changes to flashing. The fan motor will turn
off when the lamp has cooled.
Power LED Blue Solid(Full brightness)
Lamp LED Red Flash
Temp LED Red Off
Temperature is too high. The lamp will turn off.
The fan motor is cooling the lamp.
Power LED Off Off
Lamp LED Red Solid
Temp LED Red Solid
The lamp ignition failed. If temperature is too high,
the fans will cool the lamp.
ViewSonicCorporation Confidential - Do Not Copy PJD5112
27

Other manuals for ViewSonic PJD5112

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ViewSonic PJD5112 and is the answer not in the manual?

ViewSonic PJD5112 Specifications

General IconGeneral
Projection distance1.2 - 10 m
Projection technologyDLP
Contrast ratio (typical)2000:1
Projector native resolutionSVGA (800x600)
Aspect ratio4:3, 16:9
RS-232 ports1
Dimensions (WxDxH)280 x 218 x 114 mm
Power requirements90~240VAC
Lamp power180 W
Light source typeLamp
Service life of light source3000 h
Service life of light source (economic mode)5000 h
FocusManual
RMS rated power2 W
Headphone outputs2
Serial interface typeRS-232
Noise level30 dB
Power consumption (standby)1 W
Power consumption (typical)235 W
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 90 %
Product typeStandard throw projector
Market positioningPresentation
Weight and Dimensions IconWeight and Dimensions
Weight2600 g

Related product manuals