Installing and Upgrading ViewSonic Device Manager
Installing ViewSonic Device Manager
5
2.1 Installing ViewSonic Device Manager
To install ViewSonic Device Manager on your computer, please follow the steps below:
NOTE
• Before proceeding, ensure that:
Your operating system is supported (see section 1.3 on page 4)
Your computer meets system requirements (see section 1.5 on page 4)
• To install a newer version of ViewSonic Device Manager, it’s recommended
to install it directly without uninstalling the current ViewSonic Device Manager.
For more information on how to upgrade your ViewSonic Device Manager, please
refer to section “2.4 Upgrading ViewSonic Device Manager” on page 12.
1. Get a copy of the installation program of ViewSonic Device Manager for your computer.
2. Log in to your computer with an administrator account, and then locate and double-click that program.
3. Select the language used during the installation.
4. The Setup Wizard appears.
5. Click Next to continue.
NOTE
• It may take a few seconds for the wizard to enter the next page/step while preparing
for the installation of ViewSonic Device Manager.
To Next Page
Loading...
