ViewSonic SC-T45 - Creating Client Groups

Using ViewSonic Device Manager
Managing All Your Clients
49
3.4.3 Creating Client Groups
You can create a client group for putting a set of clients together for ease of management.
NOTE
• The default client group is Ungrouped. You can change a client’s group if needed.
To create a client group, please do the following:
1. On Thin Clients tab, click Thin Clients in Navigation area.
2. Click Add Group on the top of the Management area.
3. The Add Thin Client Group window appears prompting you for the name of the group.
4. Type in the desired name, and then click OK to conrm.
5. The newly created group then appears in the Client Group list.