ViewSonic SC-T45 - Creating Setting Profile Groups

Using ViewSonic Device Manager
Managing All Your Clients
56
3.4.9 Creating Setting Prole Groups
A setting profile (group configuration) is a set of client settings shared by a set of clients. Through a setting profile
(group configuration), you can configure client settings in groups.
A setting profile group is a set of profiles grouped together for ease of management.
NOTE
• To create a setting prole, rst you need to select or create the prole group to
which the new prole belongs. You can use the system default (Ungrouped), and
then change the group of the prole at a later time if necessary.
To create a setting profile group, please do the following:
1. On Thin Clients tab, click Proles.
2. The Prole Group list appears.
NOTE
• Ungrouped is the system default group.
3. Click Add Group on the top of the Prole Group list.
4. The Add Prole Group window appears prompting for the name of the prole group.
5. Type in the desired name for the prole group, and then click OK to conrm.
6. The newly created prole group appears in the Prole Group list now.