ViewSonic SC-T45 - Page 64

Using ViewSonic Device Manager
Managing All Your Clients
59
4. Type in the desired name, description, choose the applicable platform and models, and then
click Save to conrm.
5. The Edit Conguration window for the prole (group conguration) appears.
6. Use this window to edit client settings of this prole.
NOTE
• The Edit Conguration window for the prole (group conguration) is just like a
remote version of ViewSonic Client Setup on a client. You can simply edit client
settings for this setting prole through this window. For detailed instructions on
how to congure client settings, please refer to “Conguring Client Settings” on
page 113.
7. After completion, close the window.
8. The newly created setting prole is added to the Prole list.
STEP 2: Specify the applicable scope of the setting prole
To specify the applicable scope of the setting profile, please do the following:
1. Click to select the newly created prole, and then click Edit on the top of the Prole list to specify the
applicable scope of the prole.
2. Both the Prole Information and Available Clients panes appear in Management area.
3. Click at the right top of the Available Clients pane.