Viking DSOE305T - Accessing the Diagnostic Program

© 2010 Viking Preferred Service
18
Diagnostics
Accessing the diagnostic program
1. Activate the main control by selecting either the “UPPER OVEN” or “LOWER OVEN” pad.
Shown below is the screen you will see when the UPPER OVEN is selected.
2. Depress the “SETTINGS” button on the control panel. You will see the word SETTINGS in the upper left
corner of the screen and the BRIGHTNESS parameter.
3. Using the “DOWN ARROW” pad, scroll down until you see TIMEOUTS in the display.
4. Touch and hold the “down arrow” pad for five seconds (you will hear three tones) until the display
changes from TIMEOUTS to TESTS.
VQQFSPWFO
TFMFDUNPEF

DMPDL
TFUUJOHT
CSJHIUOFTT

TFUUJOHT
UJNFPVUT
TFUUJOHT
UFTUT