© 2010 Viking Preferred Service
59
WARNING
To avoid risk of electrical shock, personal injury, or death, disconnect electrical power to unit using power
switch before servicing. Wires removed during disassembly must be replaced on proper terminals to insure
correct earth ground and polarization. After servicing, reconnect power using power switch.
Service Diagnostics and Procedures–Disassembly
Freezer Light Housing (continued)
3. Lower light housing and disconnect wiring
4. Replace or repair as necessary.
5. Reverse procedure to reinstall.
Upper Freezer Bin
1. Open freezer drawer fully.
2. Press the tabs on each side of upper bins.
3. Remove upper bins.
4. Reverse procedure to reinstall.
Wiring
To Next Page
Loading...
