Selector Convection Broil position closes switches 4-F, 2-L2, 3-L2, and 6-1. 6-1 powers the
Convection fan through L1 at 120v. The Thermostat closes Switch Cy1-Cy2, which cycles the Oven
temperature, powering the R1 relay and the Oven Cycle Light. When Relay R1 2 closes it powers the
inside broil Element at 208v / 240v and the outside Broil Element at 208v / 240v. When Relay R1
closes, it powers the inside Broil Element (208 – 240) and the Outside Broil Element (208 – 240).
240 Volts 208 Volts
240v OHMS [R] WATTS [W] AMPS [I]
Inner broil element 45.2 1275 5.30
Outer broil element 32.6 1765 7.35
Total amps 12.65
208v OHMS [R] WATTS [W] AMPS [I]
Inner broil element 45.2 9.57 4.60
Outer broil element 32.6 1330 6.40
Total amps 11.00
CONVECTION BROIL
16
To Next Page
