VERT AND VESC ( TOP )
TOP REMOVAL
ILLUSTRATION “1"
1. To remove the smooth glass top:
( A ) Pull the range (rang-top) forward to remove the screws holding the back-guard in place.
( B ) Remove the back-guard.
( C ) Remove the 3 screws “A” holding the top to the frame.
( D ) Remove the 4 screws “D” and lower the control panel.
( E ) Remove the 2 screws “B” beneath front corners.
( F ) Remove the glass top.
( G ) Restore the range (range-top) by reversing procedures above.
2. To remove the landing ledge the above procedure will have to be followed in order to remove the 3 “C”
screws on the back side of the landing ledge.
28
To Next Page
Loading...
