VIPA System 300S SPEED7 CPU 313SC/DPM - Page 73

Manual VIPA System 300S SPEED7 Chapter 4 Deployment CPU 313SC/DPM
HB140E - CPU SC - RE_313-6CF03 - Rev. 07/45 4-33
• Go to www.vipa.de.
• Click on Service > Download > Firmware Updates.
• Click on "Firmware for System 300S CPUs"
• Choose the according modules (CPU, DPM, CP...) and download the
firmware Px......zip to your PC.
• Extract the zip-file and copy the extracted file to your
MMC.
• Following this approach, transfer all wanted firmware files to your MMC.
For the display of ftp sites in your web browser you may have to execute
the following adjustments:
Internet Explorer
ftp access only with version 5.5 or higher
Options > Internet options, Register "Advanced" in the area "Browsing":
- activate: "Enable folder view for ftp sites"
- activate: "Use passive ftp ..."
Netscape
ftp-access only with version 6.0 or higher
No further adjustments are required.
If you still have problems with the ftp access, please ask your system
operator.
Attention!
With a firmware update an overall reset is automatically executed. If your
program is only available in the load memory of the CPU it is deleted! Save
your program before executing a firmware update! After the firmware
update you should execute a "Set back to factory settings" (see following
page).
Load firmware and
transfer it to MMC
Preconditions for ftp
access