Chapter 6 Deployment CPU 31x with TCP/IP Manual VIPA System 300V
6-28 HB130E - CPU - Rev. 11/50
Depending on the firmware of the CP, you may execute a reboot online. As
soon as you entered a destination IP address and a valid password, the CP
is rebooted with [Apply]. This function is password protected. The
password is preset in the register Password.
IP address This field contains the IP address of the destination station for the reboot.
Per default, the IP address of the currently engineered station is entered.
The given IP address can be changed.
Password Enter the password valid for the CP. The password in delivery state is to
find in the description of your CP.
The alteration of the password happens in the register Password.
Reboot via [Apply] As soon as you click on [Apply], a reboot is executed at the CP. Reboot is
only possible with valid password. The progress of the reboot is shown via
a progress indicator. When the reboot is ready, there is an acknow-
ledgement.
Register Reboot
To Next Page
Loading...
