SECTION 2: OPERATION 27
EPI800 Manual.doc EPI 800 MANUAL 2001 Vision Microsystems Inc.
2.9 CYLINDER ANALYZER SYSTEM OPERATION
The cylinder system indicator displays BOTH cylinder head
temperature and exhaust gas temperature functions simultaneously in
the left and right halves of the indicator.
An additional feature is that the display periodically 'tells' you the
current cylinders being monitored by displaying 'n1' for cylinder #1,
'n2' for cylinder #2 and so on.
CYLINDER HEAD TEMP is displayed in the left half of the indicator
both digitally and graphically. As temperature rises, the graph rises
proportionately. Full color operating range marks are provided that
indicate the normal operating range, caution, and red line temperature
of the cylinders at a glance. A scale is also provided allowing you to
quickly and easily see current operating values.
The digital display provides 10 degree resolution. Smaller increments
such as 1 degree can change too often and visually distract the pilot.
Additionally, our exclusive warning annunciator system flashes a
warning message, indicating if a cylinder has reached 'red line'
temperature (ex: 'H2' for hot cylinder 2), or is being 'shock cooled' (ex:
'c3' for cold cylinder 3).
EXHAUST GAS TEMPERATURE is displayed in the right half of the
indicator both digitally and graphically. As temperature increases, the
graph increases proportionately. A scale is also provided to allow you
to quickly and easily see the current temperature value. The digital
display provides 10 degree resolution.
The cylinder selector switch is used to select the operating mode.
'One switch' operation means mode selection is straightforward and
easy. Just rotate the positive action switch to the desired mode.
To Next Page
Loading...
Need help?
General