vision microsystems EPI 800 User Manual

34 SECTION 2: OPERATION
EPI800 Manual.doc EPI 800 MANUAL 2001 Vision Microsystems Inc.
2.15 CHRONOMETER MODES
TIME FUNCTIONS
'UTC' UNIVERSAL TIME COORDINATED
Simply move the selector to the 'UTC' position. The display will show
universal time in hours, minutes and seconds. A distinct graphic
pattern is also displayed to indicate that the 'time' mode is active.
'LOC' LOCAL TIME
Move the selector to the 'LOC' position. The display will show local
time in hours, minutes and seconds. A distinct graphic pattern is also
displayed to indicate that one of the two 'time' modes is active.
'FLT' FLIGHT TIMER
Move the selector to the 'FLT' position. The display will show the total
time in hours, minutes and seconds since the system was last
'powered-up'. This is useful for your log book entries and in-flight time
keeping. Be sure to note the 'FLT' time before shutting off the master
as it is cleared at next 'power-up'.

vision microsystems EPI 800 Specifications

General

Brand	vision microsystems
Model	EPI 800
Category	Control Systems
Language	English