vision microsystems EPI 800 - APPENDIX G: Recommended Tools

SECTION 4: INSTALLATION REFERENCE 66
EPI800 Manual.doc EPI 800 MANUAL 2001 Vision Microsystems Inc.
APPENDIX G: Recommended Tools
The following list recommends tools needed for various operations.
These tools may be available from Vision Microsystems Inc. Contact
the factory for availability.
Tool Purpose
Manufacturers P/N
VMS P/N
Dsub Pin Crimper
Jamco HT213
2040001
Dsub Pin
Insert/Extract
Jamco 19094
2040003
Lug Terminal Crimper
Jamco HT303
2040002