vision microsystems EPI 800 User Manual

SECTION 3: SERVICE 39
EPI800 Manual.doc EPI 800 MANUAL 2001 Vision Microsystems Inc.
3.1 INDICATOR CARE AND MAINTENANCE
The indicators require no scheduled care or maintenance. However,
you probably will want to clean them occasionally. We recommend
the use of diaper flannel. NEVER use paper towels or tissues, as they
can have a high abrasive content.
To properly clean your indicator, remove surface dust and abrasives
by blowing on the indicator face or brushing with a soft bristle brush.
Next, 'fog' the indicator with your breath and gently rub the indicator.
NEVER use any solvents or cleaning fluids on the indicators.
Should removal and re-installation of the indicator become necessary,
you should always use the same mounting screws, as damage to the
indicator will result if too long a screw is used.
Use care when connecting and/or removing the rear mounted
connectors as the ejector arms can be broken if improperly handled.

vision microsystems EPI 800 Specifications

General

Brand	vision microsystems
Model	EPI 800
Category	Control Systems
Language	English