Vislink UltraReceiver LD User Manual

UltraReceiver LD User Manual
Introduction
Issue No: 2.01 Page: 5
Ref: ULRXLD-ASUM-700X Copyright © 2020 Vislink Technologies, Inc.
2. Introduction
The UltraReceiver LD is a flexible, high performance product, based on compact
DVB-T and LMS-T demodulators. It uses the Vislink Maximum Ratio Combining
diversity algorithm and a combined MPEG-2, H.264 and HEVC UHD/HD/SD
decoder.
Various licenses are available over the base configuration of HEVC HD and two-
channel single pedestal demodulator.
Licensed options are:
 HEVC 4K, UHD
 HEVC Dual HD
 H.264, SD/HD
 Demodulator 4 channel inputs
 Demodulator 4 channel dual pedestal
 Demodulator ASI packet switching
 Demodulator deep de-interleaving
2.1. Decoder Only Variants
If you have the decoder-only variant of this product, ignore any reference to the
RF and Demodulator functions in this manual.
2.2. Firmware Version
See the Vislink website for details of latest firmware revision:
 www.vislink.com
2.3. Internal Architecture
The UltraReceiver uses three main hardware components:
 Demodulator board
 Decoder board
 Controller board

Vislink UltraReceiver LD Specifications

General

Brand	Vislink
Model	UltraReceiver LD
Category	Receiver
Language	English