VisorJet VJS-B620-2-LPR - Page 64

64
ВАРШ.201219.009РЭ
Description of the Network tab is presented in Table B.4.4
Table B.4.4 - Buttons of the Network tab
Tab
Button
Description
TCP/IP
Get IPv4 address
automatically
Get an IP address from a DHCP server automatically
Use fixed IPv4
adress
Use fixed IPv4 adress
IP adress
Specify static IPv4 address
IPv4 Subnet
Mask
Specify the subnet mask of the camera
IPv4 Default
Gateway
Specify default router
Preferred DNS
Server
Specify default DNS server
IPv6 Mode
Selecting the IPv6 type:
Manual / SLAAC / DHCPv6
IPv6 Adress
Specify static IPv4 address
IPv6 Prefix
Specify IPv6 Prefix Length
IPv6 Default
Gateway
Specify default IPv6 router
HTTP
HTTP Enable
Start or stop using HTTP
HTTP Port
Web GUI login port, the default is 80, the same with ONVIF
port.
HTTPS Enable
Start or stop using HTTPS
HTTPS Port
Web GUI login port via HTTPS, the default is 443
Sertificate
Allows you to reset the certificate to the default.
Atributes
Information about the recipient of the certificate, the issuer, the
validity period.
Installation Type
Select a certificate, specify the data in the window that opens:
Create Certificate: Generate a self-signed certificate
Install from file: Install ready-made certificate
Create Certificate Request: Create Certificate Request
RTSP
RTSP Port
The port of RTSP, the default is 554. To get detailed infor-
mation and type of a line, click « »
Playback Port
The port of playback, the default is 555. To get detailed infor-
mation and type of a line, click « »
RTP Packet
Choice between quality and speed