VisorJet VJS-B620-2-LPR - Page 65

65
ВАРШ.201219.009РЭ
Tab
Button
Description
Multicast Group
Address
IPv4 адрес для мультивещания. По умолчанию 239.6.6.6
QoS
DSCP(0~63)
Channel priority level - from 0 to 63, encoding priority (the
higher the number, the more important the traffic)
UPnP
Enable UPnP
Enable / Disable UPnP protocol for easy implementation
Enable Port
Mapping
Check the box to enable port mapping
Name
The name of the device detected online can be edited
Type
Select automatically and get the corresponding HTTP and
RTSP port or set the port settings manually
HTTP
Specify external and internal ports, check the status.
RTSP
Specify external and internal ports, check the status.
Playback
Specify external and internal ports, check the status.
DDNS
Enable DDNS
Enable / disable dynamic DNS. It is recommended to enable
and use UPnP ports specifically for use with DDNS
Provider
Get support from DDNS provider: ddns.milesight.com,
freedns.afraid.org, dyndns.org, www.no-ip.com,
www.zoneedit.com. You can also customize the provider for
DDNS.
External HTTP
Port
Specify default port 80
External RTSP
Port
Specify default port 554
External Play-
back Port
Specify default port 555
Email
Recipient Email
Address1
Email address to receive video files
Recipient Email
Address2
User Name
The sender's name. It is usually the same as the account name
Sender Email
Address
Email address to send video files attached emails
Password
The password of the sender
SMTP Server
The SMTP server IP address or host name(e.g.
smtp.gmail.com)
SMTP Port
The default TCP/IP port for SMTP is 25(not secured). For
SSL/TLS port, it depends on the mail you use