80
ВАРШ.201219.009РЭ
B.2.5.5.3 Advanced Motion Detection
Different from traditional motion detection, Advanced Motion Detection can filter out
“noise” such as lighting changes, natural tree movements, etc. When an object moves in the selected
area, it will trigger alarm.
Step1: Set advanced motion detection region;
Step2: Set detecting sensitivity. When the sensitivity level is low, a little movement will not
trigger an alarm;
Step3: Set detection schedule;
Step4: Set alarm action;
Step5: Set alarm settings;
Step6: Save settings.
B.2.5.5.4 Tamper Detection
Tamper Detection is used to detect possible tampering like the camera being unfocused, obstructed
or moved. This functionality alerts security staff immediately when any above-mentioned actions
occur.
To Next Page
Loading...