vitapur Pro Soft VWS296GR - Setting the Language and Clock

10
The ONLY Parameters Set By Consumer (or plumber):
a) Language
b) SetClock
c) UnderAdvancedSetting
 i) Settheregenerationtime”RechargeTime”
 ii) Capacityunder“ResidualWater”.
 iii) SaltSettingLow,MediumandHighSaltSetting
CAUTION: DO NOT CHANGE ANY OTHER PARAMETERS BEYOND THE 5 LISTED
ABOVE. IT WILL ADVERSELY AFFECT THE PERFORMANCE OF THE WATER SOFTENER
Theprogrammingforthewatersoftenerisset-upwiththedefaultsettingslistedinthetablebelow.
TheONLYparametersthatshouldbeaccessedbyplumber/consumerareshowninthetableas“Adjust”.
Main Menu Display Default Settings Access To Parameters
Set 12/24 Hour Clock 12 hour clock Not Adjustable
Set Clock 12:00 A.M. Adjust
Water Used Today Display on Daily Water Consumption Display
Average Water Use in Week Display On Average Weekly Water Consumption Display
Set GAL/L/Cubic Meters GAL Not Adjustable
Advance Settings To Get Into Advanced Settings-Sub Menu
Sub Menu Advanced Settings Display
Set Work Mode A-11 Not Adjustable
Set Recharge Time (Regeneration Time) 2:00 A.M. Adjust
Set Residual Water (Capacity) 1306 U.S. Gallons @ 20 grains/U.S. Gallon Adjust
Set Interval Wash F00 Not Adjustable
Set Back Wash 2 min Not Adjustable
Set Brine & Rinse 50 min Adjust only if salt setting is being changed
Set Brine Refill 2 min Adjust only if salt setting is being changed
Set Fast Rinse 6 minutes Not Adjustable
Set Max Days/Recharge 14 days Not Adjustable
Set Output Signal b-01 Not Adjustable
1. Set The Language:ThedefaultsettingforthelanguageisEnglish.Ifyoudonotwanttochange
 thelanguageproceedtosettheclock.Thereare7languagestochoosefromconsistingofFrench,
 Chinese,Spanish,German,Italian,EnglishandRussian.
 Step1. TochangethelanguagefromEnglishtoanyoftheother6languagespresstheMenu/Confirm
   andManual/Returnkey  simultaneouslywithin2secondsofplugginginthepower
   adapter.
 Step2. Scrolldowntothelanguagepreferenceusingthedownarrow
 Step3. Pressthemenu/confirmkey
2. Set The Clock:Thetimeofdayonlyneedstobesetupduringinitialsetupandafterextendedpower
 outage(3days).Thebatteryback-uplastsupto72hoursafterapoweroutage.Thedefaultsetting
 ontheclockis12.00a.m.
 Step1. Unlockprogrambypressingthedownandup  arrowstogetherandholdfor5seconds
   ifthescreenislocked.IfnotlockedproceedtoStep2.
 Step2. PresstheMenu/ConfirmKey oncetoenterthemainmenu
 Step3. TheClockSettingistheseconditemonthemainmenu.
 Step4. PresstheMenu/ConfirmKey andthehourintheclocksettingwillstartflashing.
 Step5. Usethedownoruparrows  toscrolltothecorrecthour.TheAMandPMwillchange
   ashoursadvancefrommorningtoafternoon.
 Step6. PresstheMenu/ConfirmKey andtheminuteswillstartflashing.Usethedownandup
   arrows  toadjusttothecorrectminutesetting.
 Step7. PressMenu/ConfirmKey andmenuwillreturnto“SetClock”inthemainmenu.
 Step8. PressManual/ReturnKey toproceedbacktotheInServiceDisplayscreenifnoother
   parametersaregoingtobechanged.Ifcontinuingtochangeotherparametersscrolltodesired
   parameterusingthedownarrow inthemainmenuwithoutgoingbacktotheInService
   DisplayScreen.