5
bypass assembly (wiTh inleT and ouTleT porTs upward)
Theinletandoutletportsonthebypassassemblyare¾”maleNPTthreads.Thecouplerstoattach¾”
and½”pexpipeor¾”and½”copperpipearenotprovided.Thiscanbepurchasedatanyhardware
orplumbingstore.
Thebypassassemblycanbeinstalledonthevalvewiththeintakeandoutletportsinthedownwardor
upwarddirection.Thebypassassemblywiththeinletandoutletportsfacinginthedownwarddirection
areshowninFiguresJ&K.Thebypassassemblywiththeinletandoutletportsfacingintheupward
directionareshowninFiguresL&M.
Thepistonplungerheadonthebypassassemblywiththeredcircleiscompletelypushedinagainstthe
assemblybodywheninbypassmode(FigL).Thepistonplungerwiththeredcircleisfullyextended
wheninservicemode(Fig.M).
Thearrowsontheinletandoutletportsofthebypassassemblyshowthedirectionofwaterflowtothe
valve.Thebypassassemblyislabeledwithwhitearrowsshowingthedirectionofwaterflowwhenthe
inletandoutletportsarefacingintheupwardordownwarddirection.
Fig. J - Bypass Mode
Fig. L - Bypass Mode
Fig. K- Service Mode
Fig. M - Service Mode
bypass assembly (wiTh inleT and ouTleT porTs downward)
Piston Plunger
(PUSH IN)
Piston Plunger
(PUSH IN)
Piston Plunger
(PULL OUT)
Piston Plunger
(PULL OUT)
Outlet Port
Outlet Port Outlet Port
Outlet Port
Inlet Port
Inlet Port Inlet Port
Inlet Port
3.
4.
5.