User Manual, Version 2.1 ii
Safety Instructions
• Use the following safety guidelines to help protect your MGW Ace Encoder unit from
potential damage and to ensure your own personal safety.
• Make sure that only authorized personnel installs, connects and maintains MGW Ace
Encoder and its components.
• Read and follow all instructions marked on the product and in the documentation before
you operate your system. Retain all safety and operating instructions for future use.
• As a power switch is not incorporated in the equipment, the power plug must be
disconnected to unpower the unit.
When using MGW Ace Encoder
• Install the system on secured and stable surface.
• To help prevent electric shock, plug the power cable into properly grounded sources. Use
only properly grounded extensions and adapters as the need arises.
• Make sure that nothing rests on your MGW Ace Encoder power cable and that the cables
are not located where they can be stepped or tripped over.
• Do not spill food or liquids on your MGW Ace Encoder unit.
• Keep your MGW Ace Encoder unit away from radiators and heat sources. Do not place
your MGW Ace Encoder unit on a bed, sofa, or rug.
• When you disconnect a power cable, pull on its connector or on its strain relief loop not on
the cable itself.
• ESD Warning: Normal handling precautions should be taken to avoid static discharge.
To Next Page
Loading...
