Vitec Multimedia MGW Ace - Network Configuration using an SSH Client

MGW Ace Encoder HEVC Encoding and Streaming Appliance
User Manual, Version 2.1 84
APPENDIX A
NOTE:
Only one connection can be used at a time.
To configure the appliance's network settings using an SSH client:
1. Open an SSH terminal window (PuTTY is the recommended tool).
2. Connect to the MGW Ace Encoder IP address.
3. At the login prompt, type "root" and at the password prompt type the password (the
default is "1qaz!QAZ").
The main menu appears:
Network Configuration using an SSH Client