MGW Ace Encoder HEVC Encoding and Streaming Appliance
User Manual, Version 2.1 62
To verify connection status between encoder and decoder:
When unicast streaming is used, MGW Ace Encoder automatically tests the accessibility to the
target IP address set by the user.
• If connection is established, the event reports “Target Connection OK”
• If connection cannot be established, the event reports “Target Connection Failed” and MGW
Ace Encoder displays the IP packets route. It allows identifying the remote node where IP
traffic is stopped.
Below is an example of successful and failed connections:
To Next Page
Loading...
Need help?
General
