MGW Ace Encoder HEVC Encoding and Streaming Appliance
User Manual, Version 2.1 72
• If the login window does not appear open a new browser tab. Insert (in the URL field)
the IP address that was set to the MGW Ace Encoder prior to the upgrade. If the login
window appears close the previous browser tab and proceed to step 7.
Figure 6-5: The Login window
8. Log on (refer to the Logging on section for details).
NOTE:
The login process to an upgraded appliance might be slow in the first time you log on after the upgrade. It might
take a few minutes for the login to complete. Do not interfere with the login process.
9. In the General screen, verify that the upgrade was successful by inspecting the software
Version in the Versions and Licensing section.
To Next Page
Loading...
Need help?
General
