Vitec Multimedia MGW Ace - Page 84

MGW Ace Encoder HEVC Encoding and Streaming Appliance
User Manual, Version 2.1 81
-
NOTE:
• IP address is the Target Address as set on the Channels page, Target section.
• The port number is the Target Port as set on the Channels page, Target section.
• For RTP TS or Pro-MPEG Streams:
rtp://<Target IP Address>:<TargetPort>
-
NOTE:
• MPC doesn't support FEC so while it is possible to play Pro-MPEG stream, no error correction will
occur.
• IP address is the Target Address as set on the Channels page, Target section.
• Channel Name is the name as set on the Channels page, Target section.
4. Click OK.