Vitrek V4 - Page 45

Vitrek V4 – Electrical Safety Tester USER MANUAL
44
:ACContinuous:CMINimum
Function:
Set or query the CAC test minimum current.
Syntax:
:ACContinuous:CMINimum <NR2>
:ACContinuous:CMINimum?
<NR2> Please refer to the specification
Return:
<NR2>
Examples:
:ACContinuous:CMINimum 1.00 - sets the CAC test minimum current to 1.00mA.
:ACContinuous:CMINimum? - returns “1.00” if the CAC test minimum current setting is 1.00mA.
:ACContinuous:CMAXimum
Function:
Set or query the CAC test maximum current.
Syntax:
:ACContinuous:CMAXimum <NR2>
:ACContinuous:CMAXimum?
<NR2> Please refer to the specification
Return:
<NR2>
Examples:
:ACContinuous:CMAXimum 1.00 - sets the CAC test maximum current to 1.00mA.
:ACContinuous:CMAXimum? - returns “1.00” if the CAC maximum current setting is 1.00mA
:ACContinuous:RTIMe
Function:
Set or query the CAC ramp time.
Syntax:
:ACContinuous:RTIMe <NR2>
:ACContinuous:RTIMe?
<NR2> Please refer to the specification
Return:
<NR2>
Examples:
:ACContinuous:RTIMe 5.0 - sets the CAC ramp time to 5 sec.
:ACContinuous:RTIMe? - returns “5” if the CAC ramp time setting is 5 sec.