Vitrek V4 - Page 51

Vitrek V4 – Electrical Safety Tester USER MANUAL
50
:IRESistance:RMINimum
Function:
Set or query the IR test minimum resistance.
Syntax:
:IRESistance:RMINimum <NR1>
:IRESistance:RMINimum
<NR1> Please refer to the specification
Return:
<NR1>
Examples:
:IRESistance:RMINimum 100 - sets the IR test minimum resistance to 100M.
:IRESistance:RMINimum? - returns “100” if the IR test minimum resistance is 100M.
:IRESistance:RMAXimum
Function:
Set or query the IR test maximum resistance.
Syntax:
:IRESistance:RMAXimum <NR1>
:IRESistance:RMAXimum?
<NR1> Please refer to the specification
Return:
<NR1>
Examples:
:IRESistance:RMAXimum 100 - sets the IR test minimum resistance to 100M.
:IRESistance:RMAXimum? - returns “100” if the IR test minimum resistance setting is 100M.
:IRESistance:TTIMe
Function:
Set or query the IR test time.
Syntax:
:IRESistance:TTIMe <NR2>
:IRESistance:TTIMe?
<NR2> Please refer to the specification
Return:
<NR2>
Examples:
:IRESistance:TTIMe 5.0 - sets the IR test time to 5 sec.
:IRESistance:TTIMe? - returns “5” if the IR test time setting is 5 sec.