Vitriko LR77 v2 - Technical Parameters; Technical Parameters of Router; Technical Parameters of Module

VITRIKO
Mobile Data Experts
7. TECHNICAL P A R A M E T E R S
7. T e c h n i c a l parameters
7.1 T e c h n i c a l parameters of router
LR77 v2
Complies with standards EN 301 511, v9.0.2,
EN 301 908-1 & -2: v3.2.1,
ETSI EN 301 489-1 V1.8.1,
EN 60950-1:06 ed.2 + A11:09 + A1:10
T e m p e r a t u r e range F u n c t i o n
Storage
-30
◦
C to +60
◦
C
-40
◦
C to +85
◦
C
Protection F r e e l y
In switch board
IP20
IP56
Supply v o l t a g e 10 to 30 V DC
Consumption R e c e p t i o n
GPRS
L T E
2,3 W
to 3,5 W (GPRS transmission)
to 5,5 W (LTE transmission)
Dimensions 42 x 76 x 113 mm (DIN lišta 35 mm)
W e i g h t LR77 v2 – 150 g
LR77 v2 SL – 280 g
Antenna connector SMA – 50 Ohm
User interface ETH
USB
PORT1
PORT2
Ethernet (10/100 Mbit/s)
USB 2.0
On customer’s req u es t
On customer’s req u es t
T a b l e 12: T e c h n i c a l parameters of router
7.2 T e c h n i c a l parameters of module
L T E modul
L T E parameters Bit rate 100 Mbps (DL) / 50 Mbps (UL)
3GPP rel . 8 standard
Supported bandwidth: 5 Mhz, 10 Mhz, 20 Mhz
HSPA+ parameters Bit rate 21,1 Mbps (DL) / 5,76 Mbps (UL)
3GPP rel . 7 standard
UE C A T . 1 to 6, 8, 10, 12, 14
3GPP data compress
Continued on next page
25
Contact www.vitriko.com info@vitriko.com