Vivitek D5000 - Page 51

DLP Projector—User’s Manual
– 44 –
7. Press the Menu button on the projector.
8. Select Installation II →Advanced→Network.
9. After getting into Network, input the following:

DHCP: Off
 IP Address: 10.10.10.10
 Subnet Mask: 255.255.255.0

Gateway: 0.0.0.0

DNS Server: 0.0.0.0
10. Press
(Enter) / ► to confirm settings.
Open a web browser
(for example, Microsoft Internet Explorer with Adobe Flash Player 9.0 or higher).
11. In the Address bar, input the IP address: 10.10.10.10.
12. Press
(Enter) / ►.
The projector is setup for remote management. The LAN/RJ45 function displays as follows.
For more information, please visit http://www.crestron.com.