Vivotek FD8166 - Page 128

VIVOTEK
128 - User's Manual
URL Command Document for All SeriesFD8166
81,82,83,
120,140,
380,400,480
updateinterval 0,
3600,
86400,
604800,
2592000
0 6/6 0 to Disable automatic time
adjustment, otherwise, it indicates
the seconds between NTP
automatic update intervals.
restore 0,
<positive
integer>
N/A 7/6 Restore the system parameters to
default values after <value>
seconds.
reset -1,0,
<positive
integer>
N/A 7/6 Restart the server after <value>
seconds if <value> is
non-negative.
restoreexceptn
et
0,
<positive
integer>
N/A 7/6 Restore the system parameters to
default values except (ipaddress,
subnet, router, dns1, dns2,
pppoe).
This command can cooperate
with other “restoreexceptXYZ”
commands. When cooperating
with others, the system
parameters will be restored to the
default value except for a union
of the combined results.
restoreexceptd
st
0,
<positive
integer>
N/A 7/6 Restore the system parameters to
default values except all daylight
saving time settings.
This command can cooperate
with other “restoreexceptXYZ”
commands. When cooperating
with others, the system
parameters will be restored to
default values except for a union
of combined results.