VIVOTEK
User's Manual - 91
Event > Event settings
This section explains how to congure the Network Camera to responds to particular situations
(events). A typical application is that when a motion is detected, the Network Camera sends
buffered images to an FTP server or e-mail address as event notications. Click on Help, there
is an illustration shown in the pop-up window explaining that an event can be triggered by many
sources, such as motion detection or external digital input devices. When an event is triggered,
you can specify what type of action that will be performed. You can configure the Network
Camera to send snapshot images to your email address or send video clips to an FTP site.
Advanced Mode
Event
To configure an event with recorded video or snapshots, it is necessary to configure the server and
media settings so that the Network Camera will know what action to take (such as which server to send
the media les to) when a trigger is activated. An event is an action initiated by a user-dened trigger
source
.
In the Event column, click Add to open the event settings window. Here you can arrange three
elements -- Schedule, Trigger, and Action to set an event. A total of 3 event settings can be congured.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
