Vivotek FD8166 - Page 145

VIVOTEK
User's Manual - 145
URL Command Document for All SeriesFD8166
7.9 image setting per channel
Group: image_c<0~(n-1)> for n channel products
NAME VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION
brightness -5 ~ 5 -5 4/4 Adjust brightness of image according to
mode settings.
saturation -5 ~ 5, 100 100 4/4 Adjust saturation of image according to
mode settings.
100 means using the parameter
“saturationpercent”.
contrast -5 ~ 5 0 4/4 Adjust contrast of image according to
mode settings.
sharpness -3 ~ 3, 100 100 4/4 Adjust sharpness of image according to
mode settings.
100 means using the parameter
“sharpnesspercent”
saturationpercent 0 ~ 100 50 4/4 Adjust saturation of image by percentage.
Less 0 <-> 100 More saturation
sharpnesspercent 0~100 50 4/4 Adjust sharpness of image by percentage.
Softer 0 <-> 100 Sharper
gammacurve 0, 45 , 50,
60, 70, 80,
90, 100
0
4/4 Gamma curve.
lowlightmode <boolean>
1
4/4 Enable/disable low light mode.
profile_i0_enable
<boolean>
0
4/4 Enable/disable this profile
setting
profile_i0_policy schedule schedule 4/4 The mode which the profile is applied to.
profile_i0_begintim
e
hh:mm 18:00 4/4 Begin time of schedule mode.
profile_i0_endtime hh:mm 06:00 4/4 End time of schedule mode.
profile_i0_brightne
ss
-5 ~ 5 -5 4/4 Adjust brightness of image according to
mode settings.
profile_i0_saturatio
n
-5~5,100 0 4/4 Adjust saturation of image according to
mode settings.
100 means using the parameter
“saturationpercent”.
profile_i0_contrast -5 ~ 5 0 4/4 Adjust contrast of image according to