Vivotek FD8166 - Page 156

VIVOTEK
156 - User's Manual
URL Command Document for All SeriesFD8166
eptz 0, <positive integer> 1 0/7 A 32-bit integer, each bit can be
set separately as follows:
Bit 0 => stream 1 supports ePTZ
or not.
Bit 1 => stream 2 supports ePTZ
or not.
The rest may be deduced by
analogy
npreset 0, <positive integer> 20 0/7 Number of preset locations.
protocol_https < boolean > 1 0/7 Indicate whether to support HTTP
over SSL.
protocol_rtsp < boolean > 1 0/7 Indicate whether to support RTSP.
protocol_sip <boolean> 0 0/7 Indicate whether to support SIP.
protocol_maxcon
nection
<positive integer> 10 0/7 The maximum allowed
simultaneous connections.
protocol_maxgen
connection
<positive integer> 10 0/7 The maximum general streaming
connections .
protocol_maxmeg
aconnection
<positive integer> 10 0/7 The maximum megapixel
streaming connections.
protocol_rtp_mult
icast_
scalable
<boolean> 1 0/7 Indicate whether to support
scalable multicast.
protocol_rtp_mult
icast_
backchannel
<boolean> 0 0/7 Indicate whether to support
backchannel multicast.
protocol_rtp_tcp <boolean> 1 0/7 Indicate whether to support RTP
over TCP.
protocol_rtp_http <boolean> 1 0/7 Indicate whether to support RTP
over HTTP.
protocol_spush_m
jpeg
<boolean> 1 0/7 Indicate whether to support server
push MJPEG.
protocol_snmp <boolean> 1 0/7 Indicate whether to support
SNMP.