VOLTCRAFT DL-260A - C) Create Configuration File by Software and Load the Configuration File Created from Software Onto Data Logger; D) Perform Configuration Setting On The Website

40
c) Create conguration le by software and load the conguration le
created from software onto data logger
• Connect the data logger to your computer.
• StarttheVoltsoftsoftwareandfollowtheoperatinginstructionsinthesoftwaremanual(section6andchooseyour
supported device).
• Disconnect the data logger from your computer.
d) Perform conguration setting on the website
Thereare2optionstoopenthecongurationwebsite:
• Open http://datalogger.voltcraft.com/CongBuilder/index.jsp in a browser.
• Connectthedataloggertoyourcomputer.Openthedataloggerdriveonyourcomputer.Clickonthelink“Congu-
rationWebsite.html”toopenthecongurationwebsite.
Main Screen - Overview
General Settings
Choosethedesiredlanguageforthewebsitebyclickingonthecorrespondingag.
Select the model of your data logger. The model name is mentioned on the
packaging and/or product. Chosen model type will be highlighted in red.
MEASUREMENT options
Here you select the logging parameters for your data logger.
Forfurtherinstructions,pleasereferto“MEASUREMENT”options-“BASIC
SETTING”onpage41and“MEASUREMENT”options-“ALARMSETTING”on
page 42.
PDF REPORT OPTIONS
HereyoudenethecontentandnameofthePDFreport.
Forfurtherinstructions,pleasereferto“PDFREPORTOPTIONS”onpage43.
Other settings
Hereyoucancreatethecongurationle,loadaprevioussettingorrestoreentries
to default.
Forfurtherinstructions,pleasereferto“Othersettings”onpage44.