102
TAMD63 TAMD71, TAMD72
A. Angle nipple and cock (inlet)
Hot water outlet:
Location of angle nipples with cock (Thread: 1/2"–14
NPTF)
A. Angle nipple and cock (outlet)
●
Extra power take-off at the front of the engine
(TAMD71B engines in commercial operation):
Pulley, mounted on crankshaft. Max. output 7.35
kW. Outer diameter Ø158 mm (6.220").
Disengageable clutches, gear ratio 1:1.
– Rockford BW 203 mm (8"). Max. output at 1800
rpm. 58 hp. Max. torque 226 Nm (23 kpm/166.7
ft.lb.).
– Rockford BW 254 mm (10"). Max. output at
1800 rpm. 80 hp. Max. torque 314 Nm (32 kpm/
231.6 ft.lb.).
●
Toolkit
●
Exhaust riser
●
Muffler
●
Bilge/scavenging pumps, 24V (TAMD71 in com-
mercial operation). Capacity at 1800 rpm and 3 m
(9.8 ft) suction height:
– 1 1/4" – 230 l/min.
– 2" – 300 l/min.
●
Hydraulic pump (only for engine with seawater
pump)
●
Trolling valve for Twin Disc reverse gears MG507–
1 and MG507A–1
To Next Page
Loading...